Fork Mounted Snow Plow Blade
Hire
-
$640.00 – $3,260.00 / Day
Unique design attaches to lift truck forks. Pass through fork tubes keep weight back towards lift truck mast. Locking pins secure snow plow for forks for safety. Manual pivot mechanism for angled plowing on both sides. Floating pads allow for adjustment of plowing height. Adjustable springs allow the 72″ blade to pivot back for safety. Steel construction with painted finish.
SKU: N/A
Category: Forklift Attachments
Related products
-
Forklift Tie-Down Clamps
Hire
-
Day Rate
$830.00 / Day
<strong>Forklift tie down clamps are a great asset when securing loads for transport. The entire set is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).</strong>Select options -
-
Fork Rear Spacers
Hire
-
Day Rate
$220.00 – $250.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -
-
67° Self-Dumping Steel Hoppers with Bumper Release
Hire
-
Day Rate
$1,390.00 – $3,560.00 / Day
<strong>The Self-Dumping Hoppers automatically dump when the bumper release contacts the side of dumpster. The Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the lift truck to manually dump the hopper. A locking chain is provided to secure the hopper to the lift truck. Usable fork pockets are 7 1/2"W x 2 1/2"H. Constructed with durable, consistent robotic welds. Base fork pockets are 3/16" thick. Powder coat blue finish.</strong>Select options -
-
Coil Ram Attachments
Hire
-
Day Rate
$780.00 – $1,710.00 / Day
<strong>The Coil Rams are used to easily maneuver many types of coiled material. The Coil Rams are available in both class II carriage mount & fork mount.</strong>Select options -