Fork Mounted Pallet Dumper / Retainer
Hire
-
$890.00 / Day
Dump loaded pallets easily without leaving the seat of your lift truck with the all welded steel constructed Pallet Dumper / Retainer. Unit fits to forks and is secured by a safety chain. Two retainers hold the pallet in place while dumping the contents into the hopper or dumpster. Standard fork pockets are 7 1/2″ wide x 2 1/2″ high on 25″ center, 2000 lbs capacity.
SKU: N/A
Category: Forklift Attachments
Related products
-
Fork Extension Storage Rack
Hire
-
Day Rate
$530.00 / Day
<strong>The Fork Extension Storage Rack allows operators to install or remove fork extensions without lifting, pushing or getting off the lift truck (fork extensions not included). Easy to use: A) Drive in so tips of forks are over elevated bar. B) Lower forks until fork nests in channel in base of rack. C) Back fork truck out of fork retraining straps.</strong>Select options -
-
Forklift Tie-Down Clamps
Hire
-
Day Rate
$830.00 / Day
<strong>Forklift tie down clamps are a great asset when securing loads for transport. The entire set is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).</strong>Select options -
-
Open Ended Hopper
Hire
-
Day Rate
$2,460.00 / Day
<strong>Reduce bending and lifting motions while loading items into a hopper. This hopper will allow for convenient and orderly loading at ground level with its open front design. Flat items can be loaded so more can be put into the hopper. Rolling smoothly on 4" x 2" phenolic casters, the hopper can easily be moved from one location to another. Once the hopper is full or the user has finished loading, the hopper can be easily dumped with the use of a lift truck.</strong>Select options -
-
Fork Rear Spacers
Hire
-
Day Rate
$220.00 – $250.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -