Hire
-
Day Rate
$930.00 – $1,860.00Price range: $930.00 through $1,860.00 / Day
-
-
<strong>The Low Profile Self-Dumping Hoppers have a full 90° dump angle with a cushioned rubber bumper stop. The low profile design is essential for convenient loading. Dumping with a forklift is quick and simple. A cable is pulled from the seat of the lift truck to dump the hopper. The unit returns to an upright and locked position when lowered to the ground. A locking chain is provided to secure the hopper to the lift truck. 22 "L usable fork pockets measure 7"W x 2"H on 11 5/8" centers. Unit includes robotic welds for a consistent, durable design. Formed base thickness is 1/4". Blue powder coat finish.</strong>
Select options
<strong>Forklift tie down clamps are a great asset when securing loads for transport. The entire set is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).</strong>
Select options
<b>The Bag Lifter is ideal for industrial and manufacturing settings. The unit is constructed of powder coated steel for durability and added strength. The lifter can be used with the center mounted hook point for balanced lifting capabilities with an overhead hoist, or with a forklift by utilizing the attached fork pockets. 48" long restraining strap is included to secure the attachment to the lift truck. After choosing which lifting style is best, secure the loops of the bag to the four strap points for safe maneuvering and transporting. Capacity is 4,000 lbs evenly distributed, and usable fork pockets measure 6-3/4" wide by 3-1/4" high.</b>
Select options
Hire
-
Day Rate
$220.00 – $250.00Price range: $220.00 through $250.00 / Day
-
-
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>
Select options
