Related products

• 

  Traveling Battery Station

  Hire

  • Day Rate

    $2,150.00 – $3,970.00 / Day

  <strong>The Traveling Battery Station is an efficient one-person changing system with five models available to fit any requirements. These stations have a total capacity of 3,600 lbs and contains spark-proof rollers for added protection. Must specify roller height when ordering any roller stands.</strong>

  Select options
• 

  Wall Mounted Charger Brackets

  Hire

  • Day Rate

    $310.00 / Day

  <strong>Reduces floor damage of chargers and allows for a clean and safe floor area (universal fit). Dimensions: 24.13" deep x 24.13" tall. Supports up to 400 lbs on a wall with sufficient bearing strength.</strong>

  Select options
• 

  Gravity Feed Eye Wash Station

  Hire

  • Day Rate

    $350.00 / Day

  <strong>OSHA approved emergency eyewash stations are needed in the workplace for adequate eye protection for workers on the job.</strong> <strong>The first 10 to 15 seconds after exposure to a hazardous substance, especially a corrosive substance, are critical. Delaying first-aid treatment, even for a few seconds, can result in a serious injury. Emergency eyewash stations provide on-the-spot decontamination and cleansing.  </strong><strong>The convenience of having the eyewash station in areas where there is no other form of water source allows workers to wash away any hazardous substances that may cause an injury directly after they have been exposed. The Gravity Feed Eye Wash Station highly visible yellow polyethylene plastic housing unit is ideal for warehouse and industrial environments. It mounts to any wall with a pull down tray that stays in a fixed open position during activation. The emergency eyewash compartment is enclosed by the durable ABS plastic hinged drain tray.</strong> <b>BONUS HYDROSEP WATER ADDITIVE INCLUDED!</b>

  Select options
• 

  Heat Shrink PVC Battery Cable Protector

  Hire

  • Day Rate

    $20.00 – $40.00 / Day

  <strong>The Heat Shrink PVC Battery Cable protector prevents costly damage to both battery cables & connectors. The protective PVC heat shrink allows forklift operators to separate connectors safely when pulling from the cables. The PVC also prevents damage to battery cables caused by pinching from the hood of the lift truck. To install, simply fit the heat shrink over the connector & cable and apply a heat gun until a tight fit is created. While still warm, place cables back into connector so heat shrink cools to desired shape.</strong>

  Select options