Fork Rear Spacers
Hire
-
Price range: $220.00 through $250.00 / Day
The Fork Rear Spacers provide a 12″ gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4″, 5″ and 6″ wide forks.
Related products
-
Fork Extensions
Hire
-
Day Rate
Price range: $410.00 through $770.00 / Day
<strong>Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from welded steel construction with cast steel tips. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. Maximum uniform capacity is 4,000 lbs evenly distributed per pair. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48" existing forks, the fork extension should not exceed 72").</strong>Select options -
-
Forklift Tie-Down Clamps
Hire
-
Day Rate
$830.00 / Day
<strong>Forklift tie down clamps are a great asset when securing loads for transport. The entire set is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).</strong>Select options -
-
Fork Mounted Pallet Dumper / Retainer
Hire
-
Day Rate
$930.00 / Day
<strong>Dump loaded pallets easily without leaving the seat of your lift truck with the all welded steel constructed Pallet Dumper / Retainer. Unit fits to forks and is secured by a safety chain. Two retainers hold the pallet in place while dumping the contents into the hopper or dumpster. Standard fork pockets are 7 1/2" wide x 2 1/2" high on 25" center, 2000 lbs capacity.</strong>Select options -
-
Low Profile 90° Self-Dumping Steel Hoppers
Hire
-
Day Rate
Price range: $930.00 through $1,860.00 / Day
<strong>The Low Profile Self-Dumping Hoppers have a full 90° dump angle with a cushioned rubber bumper stop. The low profile design is essential for convenient loading. Dumping with a forklift is quick and simple. A cable is pulled from the seat of the lift truck to dump the hopper. The unit returns to an upright and locked position when lowered to the ground. A locking chain is provided to secure the hopper to the lift truck. 22 "L usable fork pockets measure 7"W x 2"H on 11 5/8" centers. Unit includes robotic welds for a consistent, durable design. Formed base thickness is 1/4". Blue powder coat finish.</strong>Select options -